• Follow us
Home > Blog > Content
Turntable bearings appear inflexible causes and solutions
Nov 14, 2017


Causes and solutions to inflexible support

Slewing bearings are an integral part of a mechanical product, but sometimes we find it inflexible and, if inflexible, there is a lot of hassle in use and no solution Work today, today Xuzhou Hailin Slewing Bearing Co., Ltd. for everyone to share the slewing bearing stagnation or movement is not flexible reasons and solutions.

1, slewing gear deformation or broken teeth caused by stagnation or movement is not flexible. The corresponding solution: Maintenance gear, re-welding gear.

2, rotary bearing seal system problems, this will result into debris, such as stones, sand, etc. caused by stagnation or movement insensitivity. The corresponding solution: clean up all the debris.

3, overload operation, resulting in slewing bearing movement is not flexible. The corresponding solution: need to reduce the workload of the work.

4, slewing bearing position is not flat. The corresponding solution: Need to change the platform position, work in a flat position.

5, there is a lack of slewing ring lubricant situation, grease friction increases, the resistance becomes larger, it will cause movement insensitivity. The corresponding solution: Add the same specifications of the lubricating oil or replace all the lubricating oil.

Knowing the inflexible causes and solutions of slewing rings, we do not have to worry about this afterwards. In addition to the user need to know this knowledge, but also need to understand the use of slewing bearing precautions and related maintenance methods.